Wicklungswiderstandsmessgerät für Dreiphasentransformatoren DV Power TWA25A

SKU: TWA25A-EU-R1

DV Power TWA25A device is a three-phase transformer winding ohmmeter for both HV and LV windings. It generates test currents up to 25 A.

  • Standard accessories included
  • Software included
  • Certificate of calibration included
  • 3 years warranty
Kostenloser Versand über 200 EUR
Geschätzte Versandzeit 4-5 weeks
As one of the main parts of an electrical substation, a power transformer must be reliable and operative 24 hours a day, 7 days in a week. Proper maintenance of the electrical transformer is beneficial in order to increase safety and detect problems before they become too dangerous. It also helps to reduce maintenance expences.One of the most important maintenance test of power transformers is winding resistance measurement. The Three-Phase Winding Ohmmeter DV Power TWA25A is a device that provides the possibility of six-winding resistance measurement of both High Voltage and Low Voltage side performed with a single cable connection. It is also capable to perform the three-phase automatic transformer demagnetization. TWA25A can generate up to 25 A fully filtered DC ripple-free test current. Both the injection of the current and the discharge of energy from the magnetic circuit are automatically regulated. The demagnetization of the transformer is useful for removing remanent magnetism which can cause problems such as invalid frequency response and excitation current measurements or an increased inrush current at start-up of a power transformer.The Three-Phase Winding Ohmmeter DV Power TWA25A typical aplications are: A six-winding measurement of transformer winding resistances A three-phase or single-phase automatic transformer demagnetization Both HV and LV side are connected at once with the use of two sets of four cables. The connection to the transformer is made using two-contact clamps that provide the four-wire Kelvin test method. Official DV-Win software is included in the purchasing price of the The Three-Phase Winding Ohmmeter DV Power TWA25A. Using the software a test can be controlled, performed and observed from a PC (or notebook) and the results can be saved directly on a PC. Also, with using the DV Win software the results can be arranged, exported and printed for a report.
Produktinformation
Produktname Wicklungswiderstandsmessgerät für Dreiphasentransformatoren DV Power TWA25A
Marke DV Power
Herkunftsland Sweden;
Winding Resistance Measurement
Test currents 5 mA – 25 A DC
Output voltage up to 55 V DC
Measurement range 0,1 μΩ – 10 kΩ
Mesurement resolution 0,1 μΩ – 1 Ω
Typical accuracy ± (0,1 % rdg + 0,1 % FS)
OLTC Dynamic Resistance Measurement
Sampling rate 4 ms
Open circuit detection and warning Automatic
Transition current ripple measurement Yes
Transition time measurement Yes
Temperature measurement
One temperature measurement channel Thermometer Pt100 class B
Mesurement range -50 °C – +180 °C
Mesurement resolution 0.1 °C
Power supply
Powered by Mains power
Mains power connection according to IEC/EN60320-1
UL498, CSA 22.2
Mains power input voltage 90 V – 264 V AC
Mains power input frequency 50/60 Hz
Input power 1500 VA
Data Storage
Internal memory positions 500
Storage USB flash drive feature enables storage of a huge number of measurements
Computer Interface
Interface v1 USB (standard)
Interface v2 RS232 (optional)
Display
Display v1 LCD screen with 20 characters by 4 lines
Display v2 LCD with backlight
Environmental Conditions
Operating temperature -20 ºC – +55 ºC (-4 ºF – +131 ºF)
Storage & transportation -40 ºC – +70 ºC (-40 ºF – +158 ºF)
Humidity 0 % – 95 % relative humidity
Applicable Standards
Installation/overvoltage CAT II
IEC/EN 61010-1
Pollution Degree 2
Low voltage directive Directive 2014/35/EU (CE Conform)
Electromagnetic compatibility Directive 2014/30/EU (CE Conform)
EN 61326-1
Abmessungen und Gewicht
Abmessungen (W x H x D) 194 x 478 x 389 mm (7,6 x 18,8 x 15,3 in)
Gewicht 12.8 kg (28,2 lbs)
  • Cable plastic case - large size
  • Ground (PE) cable
  • USB cable
  • H winding test lead set, 4 x 10 m with TTA clamps (compatible with TWA and TRT series)
  • Mains power cable EU 16 A
  • Plastic transport case – medium size
  • USB with DV-TR software
  • Tap changer control cable 5 m
  • TWA25A device
  • X winding test lead set, 4 x 10 m with TTA clamps (compatible with TWA and TRT series)
The DV-Win software enables control and observation of the test process, as well as saving and analyzing the results on a PC. It provides a test report arranged in a selectable form as an Excel spreadsheet, PDF, Word or ASCII format. The software provides additional OLTC (tap changer) verification options by recording the test current during the transitions. The standard interface is USB. RS232 is optional.