Mikroohmmeter DV Power RMO200A
SKU: RMO200A-EU-R1
Powerful (up to 200 A test current) and lightweight (only 7 kg) micro-ohmmeter with IP43 protective rating. Ideal for contact resistance measurement of circuit breakers, disconnector swithes, bus-bars, etc.
- Standard accessories included
- Software included
- Certificate of calibration included
- 3 years warranty
Kostenloser Versand über 200 EUR
Geschätzte Versandzeit 4-5 weeks
Geschätzte Versandzeit 4-5 weeks
Ideal for contact resistance measurement of circuit breakers, disconnector swithes, bus-bars, etc.RMO200A Micro Ohmmeters (hereafter referred to as “RMO200A”) is based on a state of the art technology, using the most advanced switch mode technique available today.RMO200A generates a true DC ripple-free current with automatically regulated test ramps. During a test the RMO200A ramps with increasing current before measuring and decreasing current after the measurement. This eliminates magnetic transients. The RMO200A instrument can store internally up to 500 measurements. All measurements are time and date stamped. Using the DV-Win software a test can be performed from a user’s PC, and the results can be obtained directly on the PC. Communication between the RMO200A and a PC is through an USB (as standard) or an RS232 cable (as an option). Bluetooth communication interface is also available as an option. Using the DV-Win the result can be arranged as an Excel spread-sheet which can be later shown as a diagram and printed for a report. The set is equipped with a thermal and an overcurrent protection. The RMO200A has a very high ability to cancel electrostatic and electro-magnetic interference in HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing a proprietary hardware and software.
| Produktinformation | |
|---|---|
| Produktname | Mikroohmmeter DV Power RMO200A |
| Marke | DV Power |
| Herkunftsland | Sweden; |
| Measurement | |
| Test current | up to 200 A DC |
| Maximum test duration | 150 s |
| Open circuit voltage | 10 V DC ± 2% |
| Full load voltage | 7,1 V (at 230 V AC) 6,1 V (at 115 V AC) |
| Measurement range | 0,1 µΩ – 999,9 mΩ |
| Measurement resolution | 0,1 μΩ – 1 mΩ |
| Typical accuracy | ± (0,1 % rdg + 0,1 % FS) |
| Mains Power Supply | |
| Connection according to | IEC/EN60320-1 C320 |
| Mains supply | 90 V – 264 V AC 50/60 Hz |
| Power consumption | 1890 VA (at 230 V AC) 1880 VA (at 115 V AC) |
| Fuse | 12 A 250 V type F |
| Data Storage | |
| Internal memory positions | 500 |
| Computer Interface | |
| Interface | USB |
| Display | |
| LCD screen with | 20 characters by 4 lines |
| LCD with | backlight |
| Printer (optional) | |
| Printer | Built-in thermal printer |
| Paper width | 80 mm (3,2 in) |
| Environmental Conditions | |
| Operating temperature | -10 ºC – +55 ºC (+14 ºF – +131 ºF) |
| Storage & transportation | -40 ºC – +70 ºC (-40 ºF – +158 ºF) |
| Humidity | 5 % – 95 % relative humidity |
| Environmental Protection | |
| Protection | IP 50 |
| Dimensions and Weight | |
| Dimensions (W x H x D) | 198 x 255 x 380 mm (7,8 x 10 x 11 in) |
| Weight | 7 kg (15,4 lbs) |
| Applicable Standards | |
| Installation/overvoltage | CAT II IEC/EN 61010-1 |
| Pollution | degree 2 |
| Low voltage directive | Directive 2014/35/EU (CE Conform) |
| Electromagnetic compatibility | Directive 2014/30/EU (CE Conform) EN 61326-1 CAN/CSA-C22.2 No. 61010-1, 2nd edition, including Amandment 1 |
| Abmessungen und Gewicht | |
| Abmessungen (W x H x D) | 255 x 198 x 380 mm (10,0 x 7,8 x 15,0 in) |
| Gewicht | 7 kg (15,4 lbs) |
- Current cables 2 x 5 m 25 mm2 with battery clamps (B1)
- Cable bag
- Ground (PE) cable
- USB cable
- Mains power cable EU 16 A
- RMO200A device
- Sense cables 2 x 5 m with alligator clamps (A2)
- USB with DV-Win software
- Transport bag for instruments in Metal housing
RMO DV-Win Software provides several advanced features as a supplement to multiple functions of RMO devices. Testing in Continuous mode is upgraded with a sample time feature which allows user to record test results in specific time intervals set in seconds. After performed measurements results can be saved in a various formats and test report can be generated and saved or printed. Result can also be downloaded from the device to the PC by use of several different search filter.For the RMO form of DV-Win software there is Help menu available, with detailed instructions and explanations of all functions and features.