Leistungsschalter-Spulenprüfgerät und Netzteil DV Power POB30AD
SKU: POB30AD-EU-R1
If the substation´s battery is not available, POB30AD is ideal instrument to power up your spring-charging motors and coils.
- Standard accessories included
- Certificate of calibration included
- 3 years warranty
Kostenloser Versand über 200 EUR
Geschätzte Versandzeit 4-5 weeks
Geschätzte Versandzeit 4-5 weeks
Coil Tester & Power Supply POB30AD is powerful, lightweight power supply device, ideal for operating and testing circuit breakers coils. It is also intended to supply spring-charging motors with the possibility to generate the inrush current of up to 30 A. For supplying the circuit breaker auxiliary circuits, it provides wide output DC (10 – 300 V) and AC (10 – 250 V) voltage ranges. POB30AD has built-in capability to perform an automatic test of minimum trip-voltage (in accordance to IEC 62271-100 and ANSI C37.09 standards). It can be used as a general power supply device or a temporary battery charger. Note that it is compatible with the circuit breaker analyzers from different vendors.
Produktinformation | |
---|---|
Produktname | Leistungsschalter-Spulenprüfgerät und Netzteil DV Power POB30AD |
Marke | DV Power |
Measurement | |
Coils output DC voltage | 10 – 250 V AC 50/60 Hz true RMS |
Motor output DC voltage | 10 – 250 V DC |
Output current | 1 – 50 A |
Measurement range | 0,1 µΩ – 25 Ω |
Measurement resolution | 0,1 μΩ – 10 mΩ |
Typical accuracy | ± (0,25 % rdg + 0,25 % FS) |
Mains Power Supply | |
Connection according to | IEC/EN60320-1 C320 |
Mains supply | 90 V – 264 V AC 50/60 Hz |
Power consumption | 3000 VA |
Fuse | 12 A 250 V type F |
Display | |
LCD screen with | 20 characters by 4 lines |
LCD with | backlight |
Environmental Conditions | |
Operating temperature | -10 ºC – +55 ºC (+14 ºF – +131 ºF) |
Storage & transportation | -40 ºC – +70ºC (-40 ºF – +158 ºF) |
Humidity | 5 % – 95 % relative humidity |
Environmental Protection | |
Protection | IP 43 |
Applicable Standards | |
Installation/overvoltage | CAT II IEC/EN 61010-1 |
Pollution | degree 2 |
Low voltage directive | Directive 2014/35/EU (CE Conform) |
Electromagnetic compatibility | Directive 2014/30/EU (CE Conform) EN 61326-1 |
CAN/CSA-C22.2 No. 61010-1, 2nd edition, including Amandment 1 | |
Abmessungen und Gewicht | |
Abmessungen (W x H x D) | 287 x 205 x 367 mm (11,3 x 8,1 x 14,5 in) |
Gewicht | 10.6 kg (23,4 lbs) |
- Cable set 6 x 2 m 2,5 mm2 with banana plugs
- Cable bag
- Ground (PE) cable
- Mains power cable EU 16 A
- POB30AD device
- Transport bag for SAT and POB Series